Ciri dan fungsi pelbagai jenis mesin cetak suntikan.

Bercakap tentangmesin cetak suntikan, mungkin kebanyakan orang tidak boleh merasa sangat asing. Mesin suntikan yang dipanggil, sebenarnya, juga boleh dipanggil mesin suntikan. Merupakan peralatan cetakan utama yang menggunakan acuan plastik untuk membuat produk plastik dengan pelbagai bentuk. Ia boleh dibahagikan kepada pelbagai kategori mengikut kaedah pemplastik, kaedah penghantaran mesin dan kaedah operasi. Untuk membantu pengguna memanfaatkan nilai dengan lebih baikmesin cetak suntikan, Tongjia Heavy Industries, a professional manufacturer of mesin cetak suntikan, will introduce the characteristics and scope of application of different types of mesin cetak suntikan in detail.
Jenis pertama: mesin cetak suntikan mendatar
This is a relatively common type of mesin cetak suntikan. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the mesin cetak suntikan on the market adopt this type.

Jenis kedua: menegakmesin cetak suntikan

In this type of mesin cetak suntikan, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical mesin cetak suntikan are suitable for small mesin cetak suntikan. Generally, mesin cetak suntikan below 60 grams are more commonly used, and large and medium-sized machines are not suitable.

The third type: Angle mesin cetak suntikan

The injection direction of the angle mesin cetak suntikan is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal mesin cetak suntikan, but the inserts placed in the mold are easy to tilt and fall. This type of mesin cetak suntikan is suitable for small machines.

The fourth type: multi-mode turntable mesin cetak suntikan

Ia adalah istimewamesin cetak suntikan with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of mesin cetak suntikan gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.