Tiga kriteria untuk memilih minyak hidraulik untuk mesin cetak suntikan!

Mesin cetak suntikanadalah proses pemprosesan plastik, pemprosesan polimer akan menghabiskan banyak tenaga, dan sejumlah besar penggunaan tenaga juga akan dihasilkan dalam alat penyejuk, pemampatan udara dan pautan lain. Mesin pengacuan suntikan penggunaan tenaga yang begitu besar semestinya memerlukan minyak hidraulik. Telah menghasilkan standard yang sangat tinggi, jadi bagaimana memilih minyak hidraulik mesin cetak suntikan? Terdapat tiga standard utama untuk rujukan!

Salah satu kriteria untuk memilih minyak hidraulik untukmesin cetak suntikan: pilih minyak hidraulik dengan kelikatan dan suhu yang sesuai. Keperluan kelikatan minyak hidraulik di tempat kerja  temperature and starting temperature of the mesin cetak suntikan are related to the fluidity of the hydraulic action of the mesin cetak suntikan and the accuracy of the transmission, which directly affects the working efficiency of the mesin cetak suntikan. Therefore, the hydraulic oil selection of the mesin cetak suntikan should consider the viscosity and stability. Whether the performance meets the requirements of the production work, if it does not meet the requirements, it should be replaced in time. At the same time, according to different external environmental temperatures, it is also necessary to appropriately select the appropriate hydraulic oil.

Kriteria kedua untuk memilih minyak hidraulik untukmesin cetak suntikan: anti-wear hydraulic oil. Generally, under high-pressure work, it will increase the friction during work. Therefore, anti-wear hydraulic oil is a hard requirement. It can not only reduce friction on mesin cetak suntikans. The damage can also improve work efficiency. At the same time, this hydraulic oil also has anti-rust and anti-oxidation effects. The anti-wear hydraulic oil that is given priority for mesin cetak suntikans is generally No. 46 or No. 68.

Kriteria ketiga untuk memilih minyak hidraulik untukmesin cetak suntikan: the shear stability of the hydraulic oil. In the production process, the hydraulic oil will be severely sheared when passing through the micro-holes of the pump and valve. At this time, the performance and effect of the hydraulic oil will be damaged. Therefore, when the hydraulic oil is selected, the resistance to the hydraulic oil is Shearing capacity must have a high-demand selection standard, which has a good protective effect on maintaining the functionality of the mesin cetak suntikan.

There are standards for selecting hydraulic oil, and there must be standards during the use of hydraulic oil. Some hydraulic oils have a reduced efficiency after being used for a period of time, so they must be replaced in time. The blackening of the hydraulic oil or the presence of some impurities in the hydraulic oil is to remind us that there has been a problem with the hydraulic oil. We must pay attention to timely supplement and replacement of the hydraulic oil. This is not only for the maintenance of the mesin cetak suntikan, but also saves time and electricity. , An effective guarantee for work.